Support

QM14DVR4C
QUICK INSTALLATION GUIDE

Unpack all the items Connect the Power Supply to back of Monitor Connect the 4 of BNC to RCA adapter to the VIDEO IN on the back of DVR Connect 2 of BNC TO RCA adapter to the back of 2 Cameras (box camera). Connect the 60 ft cable to cameras (yellow to yellow and red to red) and the other end (yellow) plug to the VIDEO IN on the back of DVR. And the RED plug to the AC ADAPTER. Make sure the Hard Drive is in the base and its locked. Put 2 pcs AAA battery (not included) to the Remote Control. Turn DVR ON. Switch is on the back Quad screen will come up and you will see the camera. If you don’t see anything (screen just black), try to push F4 on Remote control.
TO START RECORDING: There are 3 way to record: RECORDING CONTINUOUSLY: Just push Record button and to stop just push Stop. SCHEDULE RECORD: Go to SETUP – RECORD SETTING – TIMER – push enter to get OPEN – press enter again to enter Schedule time. Set your schedule time. MOTION DETECTION RECORDING: : Go to SETUP – RECORD SETTING – TIMER – push enter to get OPEN – press enter again to enter Schedule time.The first line select Everyday and First period : 00:00 – 23.59. Highlight Return and hit Enter to Exit Record Setting. Go down to MOTION DETECTION, on CAM1 click enter on SETUP. Then push SETUP button, the whole screen turn green. Click Exit. Do the same on cam2/3/4. Then on RECORD MODE, push enter and select TIMER. Highlight Return and hit Enter to Exit out.
TO START RECORDING: There are 3 way to record: RECORDING CONTINUOUSLY: Just push Record button and to stop just push Stop. SCHEDULE RECORD: Go to SETUP – RECORD SETTING – TIMER – push enter to get OPEN – press enter again to enter Schedule time. Set your schedule time. MOTION DETECTION RECORDING: : Go to SETUP – RECORD SETTING – TIMER – push enter to get OPEN – press enter again to enter Schedule time.The first line select Everyday and First period : 00:00 – 23.59. Exit Record Setting. Go down to MOTION DETECTION, on CAM1 click enter on SETUP. Then push SETUP button, the whole screen turn green. Click Exit. Do the same on cam2/3/4. Then on RECORD MODE, push enter and select TIMER. Exit out.
TO PLAY BACK Push CHECK on Remote Control and select ALL RECORD. Select the date and select the Time you want to play.
TO SETUP THE NETWORK TO BE ABLE TO SEE DVR FROM PC. Connect the CAT 5 cable from DVR to ROUTER By default IP on DVR is IP: 192.168.1.81 Subnet: 255.255.255.0 Gateway: 192.168.1.1 Check what is your LAN IP address. To do so From PC connected to same ROUTER go to: Start – Program – Accessories – Command Prompt – type in “ ipconfig “ enter. If LAN IP is 192.168.1.xx / Subnet: 255.255.255.0 / Gateway: 192.168.1.1 Then you are OK. Nothing need to be changed. But if the LAN IP is looks different like this: 192.168.2.xx / subnet: 255.255.255.0 / Gateway: 192.168.2.1, The you need to change the IP of DVR. Go to Setup – Network Setting . Change the IP to 192.168.2.81 / Subnet: 255.255.255.0 and change Gateway to 192.168.2.1.
TO VIEW DVR FROM PC LOCALLY WITHIN LAN: 1. Enter the IP of DVR in IE browser eg: http://192.168.1.81 2. Select English, Check Administrator, enter password (default): 88888888 3. From MENU on top, click Information and select Real Time and click PLAY to live video.
TO VIEW DVR FROM PC ON INTERNET Forward port 80, port 7800 and port 7801 to the IP of DVR in the ROUTER setup. (refer to your router manual) Find out what is the WAN ip address of the Router and enter this IP on IE browser.
To back up the file to the computer: - From INFORMATION drop down menu, go to RECORD RESOURCE. - Click Submit then click DOWNLOAD - Save the file. - This saved file has files extension .atm. We need to convert this file to AVI file. - To convert: Put the Installation CD in and go to CONVERSION SOFTWARE folder, open up STMTOAVI file. - Click ADD FILE and change the files of type to ".*atm" and select the atm file. - On OUTPATH, select where you want to saved the converted files. - Once it finish, you will get the AVI file and will be playable in Windows Media Player. - If you want to convert this AVI file to DVD format, you need to use your Video Editing software.
The Monitor Screen turn off by itself / goes black. How do I turn it back on ? - The screen by default will go into sleep mode automatically. To turn it back ON, just push F4 couple or three times or untill the screen come bakc up. To avoid the thing to happen again, we suggest you to setup the Motion Recording. To do so, please follow this step.