Firmware Update 8 CH DVR

Firmware Update 8 CH DVR - Instructions

WARNING: THIS IS FOR 8 CH DVR ONLY.!!!!

Warning: PLEASE TAKE THE HDD OUT WHILE DOING THE FIRMWARE UPDATE.

1. download and unzip it. Copy the folder firmware into USB flash. (we recommend Sandisk USB Flash)

2. Connect USB flash to the USB Port on the back of DVR, Go to Menu and enter SYSTEM SET menu and access to FIRMWARE UPDATE

3. select UPDATE START, push enter button. Then it will update the DVR automatically. Finally, reboot DVR.

4. If you cannot update DVR, pls replug USB key and access BACKUP SET-----USB BACKUP to check out if the USB key is detected.

5. Once the DVR rebooted, push Display, the new S/W will be 2032006040410